Alloy Bayonet Style Hose Coupler Type:Type E 63.5 / 64.4mm The most common complaint on

The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully

9/16 JIC Bulkhead 90 deg Manufactured from 6061-T6 aluminium and finished in polished black

For the recirculating version

The swage machine is equipped with the correct sized dies which crimp a collar (more commonly known as a ferrule) tightly around the hose

This improvement along with sitting the intercooler at the front of the vehicle to maximise air flow and cooling efficiency

Alloy Bayonet Style Hose Coupler Type:Type E 63.5 / 64.4mm The most common complaint onAn Alloy Hose connector to convert standard hoses to push fit locking hoses. There are several different sizes available. These are ideally suited to VAG applications but will fit many manufacturers vehicles. Just measure your existing coupling. Type "A" 60mm outside diameter (o. d.) male bayonet coupling, suitable for a 51mm Internal diameter (i. d.) hose. PLEASE NOTE: THE ORIGNAL O RINGS SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES