TF121 - Shock Absorber – Rear – +2" Travel top-qty-1771 Used when the transfer box

Used when the transfer box is stripped and rebuilt

Reverse Idler Shaft for the R380 5-speed manual gearbox

in which the pads are retained by a split pin passed through each pad so they can be renewed without detaching the caliper from the axle

This pipe routes exhaust gases rearward from the intermediate section and exits beneath or behind the body

9 m long and 22 mm in diameter

TF121 - Shock Absorber – Rear – +2" Travel top-qty-1771 Used when the transfer boxRear Shock Absorber provides damping control on the rear axle for suspension set up with approximately 50 mm of additional travel. Twin tube construction with a low pressure nitrogen and oil charge to limit aeration of the oil during repeated compression and rebound. Configured for rear axle installation on raised suspension. Open length 613 mm, closed length 383 mm, with a 20 mm shaft and a 40 mm piston. The unit delivers approximately 50. 8 mm of