Simpson DGF1.81/11.88 Fire Wall Hanger - G90 Galvanized, Made to Order Non-Returnable Coupler Nuts and a SawTooth® point that

and a SawTooth® point that starts fast without predrilling

The PSLV3 powder-actuated fastener features a 1 1/4" threaded 3/8"-16 stud with a 0

Deck-Drive™ DHPD Hardwood Screws

Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed

Ensure fasteners are driven fully for optimal load transfer and connection security

Simpson DGF1.81/11.88 Fire Wall Hanger - G90 Galvanized, Made to Order Non-Returnable Coupler Nuts and a SawTooth® point thatThe Simpson Strong Tie DGF fire wall hangers are a great time saving solution for multi level building construction. These hangers are easily installed on either 2x4 or 2x6 two hour wood stud fire walls while framing. These hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall. These ratings verify that the hangers do not reduce the two hour fire wall assembly