7/16" G-213 Round Pin Anchor Shackle | 1-1/2T G-210 Approved for use at -40

Approved for use at -40 C (-40 F) to 204 C (400 F)

or other certification when requested at time of order

Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation

thus: Increasing Synthetic Sling efficiency as compared to standard anchor and chain shackle bows and conventional eye hooks

Each base has a Product Identification Code (PIC) for material traceability

7/16" G-213 Round Pin Anchor Shackle | 1-1/2T G-210 Approved for use at -40Capacities 1 2 through 35 metric tons. Forged Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip galvanized or Self Colored. Sizes 3 8 inch and below are mechanically galvanized. Fatigue rated. Shackles 25t and larger are RFID EQUIPPED. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and